Hobart Pot and Pan Washer Repair in Riverton, WY
Need Hobart pot and pan washer repair in Riverton, WY? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
Repairing Hobart Pot and Pan Washers
Before ordering anything for a Hobart pot and pan washer, we look up the exact model number. Parts that look alike often differ between production runs, and matching the model avoids repeat visits.
How we repair your Hobart Pot and Pan Washer
A pot and pan washer is a large commercial machine with high-pressure wash pumps designed to strip baked-on food from sheet pans, stock pots and utensil bins. Every pot and pan washer uses a water inlet valve, a wash or circulation pump, spray arms, a heater, a drain pump and a control with sensors. A technician checks fill, wash, heat and drain steps one at a time to find the failed part.
Commercial dishwashers must hit sanitizing temperatures for health code compliance, so a failed heater or booster is a priority call.
Hobart Pot and Pan Washer repair at a glance
- Typical repair cost$200–$700
- Typical service life9–12 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common Hobart Pot and Pan Washer problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Door seals leak
- Likely causes
- Worn door gaskets, a warped door or loose hinges from heavy loading.
- What our technician checks
- The gasket, hinges and door alignment are inspected.
Tank will not heat
- Likely causes
- A failed element or gas burner, a tripped high limit or a low water level lockout.
- What our technician checks
- The heat source, limit and level control are tested.
Baked-on soil left on pans
- Likely causes
- Low wash temperature, low detergent concentration, overloading or a short cycle setting.
- What our technician checks
- Tank temperature, detergent feed and cycle settings are verified.
Pump motor trips the breaker
- Likely causes
- A seized pump from debris, a shorted motor winding or a failed contactor.
- What our technician checks
- Motor windings, current draw and the contactor are tested.
Weak wash pressure
- Likely causes
- A clogged pump intake screen, worn impeller, blocked wash nozzles or a motor running in reverse after electrical work.
- What our technician checks
- Pump rotation, impeller condition and nozzle flow are checked.
Drain backs up
- Likely causes
- Heavy food debris in the drain, a clogged scrap basket or grease in the floor drain line.
- What our technician checks
- The basket, drain valve and floor drain line are cleared and inspected.
Quick checks you can do safely
- Scrape heavy soil before loading pans.
- Empty and rinse the scrap basket.
- Make sure the door closes and latches fully.
- Check the detergent supply.
- Load pans so the wash nozzles can reach each surface.
Safety first: Wash water is hot and strongly alkaline, so wear gloves and eye protection when cleaning the tank.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step pot and pan washer repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the pot and pan washer to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Hobart Pot and Pan Washer repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- Wash pump impeller
- Wash pump motor
- Door gasket
- Tank heater element
- Scrap basket
- Motor contactor
- Wash nozzle manifold
We match every part to your model and serial number.
Keep your Hobart Pot and Pan Washer running longer
- Inspect door hinges and gaskets monthly.
- Delime on schedule.
- Drain and clean the tank daily.
- Clean pump intake screens after every shift.
- Keep the floor drain clear of grease buildup.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorHobart Pot and Pan Washer repair in Riverton, WY
High altitude, dry air and cold winters in Wyoming affect how ovens, ranges, dryers and water heaters in Riverton perform.
We provide pot and pan washer repair throughout Riverton, including ZIP code 82501, and in nearby Lander, Thermopolis and Worland.
Hard water is common across much of Wyoming; where it is, minerals build scale on heating elements, valves and spray parts, so descaling and filter changes matter more.
Pot and Pan Washer brands we repair
Frequently Asked Questions
How much does Hobart pot and pan washer repair cost in Riverton, WY?
Most Hobart pot and pan washer repairs fall roughly between $200 and $700, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my Hobart pot and pan washer the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including Champion and Hobart.
Should I repair or replace my Hobart pot and pan washer?
A typical Hobart pot and pan washer lasts about 9 to 12 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other dishwashers repairs
- Drawer Dishwasher Repair
- Door-Type Dishwasher Repair
- Portable/Countertop Dishwasher Repair
- Pre-Rinse Spray Station Repair
- Built-in Dishwasher Repair
- Conveyor/Flight Dishwasher Repair
- Utensil Washer Repair
- Glass Washer Repair
- Dishwasher Repair
- Undercounter Dishwasher Repair
More repair services
Get your pot and pan washer fixed in Riverton
Upfront quote before work starts · Parts matched to your model · 90-day warranty